|
AdamHoule (November 30, 1999 at 12:00 am)
Hey man great tip. I just finished taking my side mouldings off and it looks great. I also used a blow dryer to heat the adheasive and it helped the moulding come off much better. Thanks for the help bro. Really appreciate it.
jordansonmyfeet23 (November 30, 1999 at 12:00 am)
Just did mine. Wish I would have saw this before I actually took the molding off the way I did. I had a lot of adhesive left. I used 3M adhesive remover and the whole car took about 3.5 hours. Looks great now. Good video. You can find anything on youtube!!!!
johngrove (November 30, 1999 at 12:00 am)
Actually, that's where most of the shopping carts are. People are too lazy to walk their fast asses to the cart return so they leave them and the wind blows them. I came out of a store and there was two carts touching my car. I was pissed!
writeonyourhand (November 30, 1999 at 12:00 am)
and some people purposely aim their shopping carts directly at expensive cars parked far from the front
alive5050 (November 30, 1999 at 12:00 am)
Most people who drive a 300 and take the time to do aftermarket/custom work to it usually don't park like a retard in the front isles...we park far away from other vehicles.
numberoftheday (November 30, 1999 at 12:00 am)
If you take the big emblem off there are two fasteners inside trunk lid. This leaves open holes in the trunk.
aliens300c (November 30, 1999 at 12:00 am)
You can remove the back SIDE mouldings, But the Chrysler wing moulding has two holes under it
umkimmel (November 30, 1999 at 12:00 am)
I guess you could do this to get the back emblem off also? If you do that, will you have to repaint anything?
somewhatlongdong (November 30, 1999 at 12:00 am)
that took an hour and a half? try a hair dryer and they are off in about 2 minutes
writeonyourhand (November 30, 1999 at 12:00 am)
when your car is in the supermarket parking lot and someone smashes their door into yours or a shopping cart you will wish you had these on it |
